Preset; Pwd - Tektronix DS1000 Series User Manual

Television demodulators
Table of Contents

Advertisement

Appendix B: Remote Control

PRESET

Sets or requests the settings for one of the 20 programs without
affecting the present operation of the television demodulator. Use the
RECPRT command to activate a preset program number. The
television demodulator must be in the remote state to use this
command.
Syntax
PRESET=<pres_nr><settings_data>
PRESET?
Arguments
<press_nr> is the program number to set or query. Range 1–20.
<settings_data> Refer to the SETT command for a definition of these
parameters.
Examples
Command
`PRESET?' 10

PWD

Puts the television demodulator in the remote state and sets the remote
flag. The front panel is disabled when in the remote state. Use the
command DISC to enter the local state and clear the remote flag.
Syntax
PWD=
Arguments
none
B–24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Result
<settings_data>
Returns the program data for number 10.
DS1000 Series User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds1001Ds1002Ds1003Ds1001a77807-1

Table of Contents