Table of Contents
Advertisement
Custom Installation
CAUTION. To avoid damage to the television demodulator, attach it to
a shelf that is strong enough to hold its weight (4.8 lbs/2.2 kg).
For applications that require installation into consoles, the television
demodulator can be mounted with the front moulding flush or
protruding from the console. Always allow approximately 3 inches
(7.6 cm) of rear panel clearance for cable and power cord connections.
Rackmount Information
The television demodulator is one half-rack wide and one rack unit
high. It requires approximately 3 inches (7.6 cm) of rear panel
clearance for the power cord and cable connections and 20 inches
(50.8 cm) in front of the rack for installation and removal.
You can order the following rackmounting kits from Tektronix:
H TVGF11A adapter mounts a single instrument in a standard
19-inch rack.
H TVGF13 adapter mounts two half-rack width instruments
side-by-side in a standard 19-inch rack. Use this adapter to mount
DS1000 and VM100 series instruments side by side.
H TVGF14 adapter mounts two half-rack width instruments
vertically in a standard 19-inch rack. Use this adapter to mount
DS1000 and VM100 series instruments with a 1700 series monitor.
DS1000 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Getting Started
1–7
Advertisement
Table of Contents
