Table of Contents
Advertisement
Getting Started
By applying an RF signal to the antenna input, the television
demodulator provides baseband video and audio outputs and IF output
signals.
You can set tuning conditions for stored programs, which are held in
non-volatile memory. Tune the signal by channel, frequency, or preset
program. Twenty presets can be stored and recalled with different
configurations.
Most instrument functions are controllable through the remote serial
interface. Connection is through the SERIAL connector (9 pin) on the
rear panel. The interface type, RS232C or RS485, is configured
through the Serial Config menu. With the RS485 protocol, you can set
unique addresses for multiple units and control them all remotely.
Physical Dimensions
The dimensions of the television demodulator are length 1.8 inches
(46 mm), width 8.1 inches (206 mm), and depth 17.3 inches
(440 mm). In a 19 inch (483 mm) rack, it is a half rack wide by one
rack unit high.
Options
You can purchase the television demodulator with several options and
accessories. Table 1–1 lists the power cord options.
Table 1–1: Power cord identification
Plug configuration
1–2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Normal usage
North America
125V/15A Plug
NEMA 5-15P
Europe
230 V
Option number
Standard
A1
DS1000 Series User Manual
Advertisement
Table of Contents
