General Safety Summary - Tektronix DS1000 Series User Manual

General Safety Summary

Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of the
system. Read the General Safety Summary in other system manuals for
warnings and cautions related to operating the system.
To Avoid Fire or Personal Injury
Use Proper Power Cord.
product and certified for the country of use.
Connect and Disconnect Properly.
or test leads while they are connected to a voltage source.
Ground the Product.
conductor of the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making
connections to the input or output terminals of the product, ensure that
the product is properly grounded.
Observe All Terminal Ratings.
ratings and markings on the product. Consult the product manual for
further ratings information before making connections to the product.
Do Not Operate Without Covers.
or panels removed.
Use Proper Fuse.
product.
Avoid Exposed Circuitry.
components when power is present.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Provide Proper Ventilation.
tions for details on installing the product so it has proper ventilation.
DS1000 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Use only the power cord specified for this
Do not connect or disconnect probes
This product is grounded through the grounding
To avoid fire or shock hazard, observe all
Do not operate this product with covers
Use only the fuse type and rating specified for this
Do not touch exposed connections and
Refer to the manual's installation instruc-
vii