Appendix B: Remote Control
PRESET
Sets or requests the settings for one of the 20 programs without
affecting the present operation of the television demodulator. Use the
RECPRT command to activate a preset program number. The
television demodulator must be in the remote state to use this
command.
Syntax
PRESET=<pres_nr><settings_data>
PRESET?
Arguments
<press_nr> is the program number to set or query. Range 1–20.
<settings_data> Refer to the SETT command for a definition of these
parameters.
Examples
Command
`PRESET?' 10
PWD
Puts the television demodulator in the remote state and sets the remote
flag. The front panel is disabled when in the remote state. Use the
command DISC to enter the local state and clear the remote flag.
Syntax
PWD=
Arguments
none
B–24
Result
<settings_data>
Returns the program data for number 10.
DS1000 Series User Manual