Table of Contents
Advertisement
PATH
Polls the television demodulator to check for status messages. The
television demodulator returns its <Ad><Ads> addresses when there is
a message and a null string when there are no messages. Use the
MSG? command to get the actual status message. If the messages are
disabled with the MSG_C command, the television demodulator will
not have a message.
For more information on using the PATH command for polling, refer
to page B–8.
Syntax
PATH= <Ad><Ars>
PATH?
Returns
Device address
<Ad>
<Ars>
Examples
Command
'PATH?'
DS1000 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
Device address, always [0F hex] for the television
demodulator.
Remote address, calculated on page B–3.
Result
<Ad><Ars>
The television demodulator has a message and is ready to
send it. The <Ad><Ars> addresses are contained in the
<data> returned.
Appendix B: Remote Control
B–23
Advertisement
Table of Contents
