AUD_PREF
Sets or requests the current audio control preference if both FM and
NICAM signals are present. The television demodulator must be in the
remote state to use this command.
Syntax
AUD_PREF= <ap_state>
AUD_PREF?
Arguments
<ap_state> is either 0 for FM or 1 for NICAM.
Examples
Command
`AUD_PREF=` 1 Audio preference is set to NICAM.
DS1000 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Result
Appendix B: Remote Control
B–15