Table of Contents
Advertisement
LOG? (Query only)
Requests the remote state of the television demodulator. Use the
command PWD to start remote operation and DISC to return to local
operation.
Syntax
LOG?
Arguments
<remote flag> 0 for local control, 1 for remote
Returns
<remote flag>
Examples
`LOG?'
0
The television demodulator is in the local state.
MSG
Clears or requests the status of the television demodulator. The MSG?
command causes the television demodulator to place any messages in
its transmit buffer. Use a receive phase to return the message. The
television demodulator can be polled continuously; see page B–8.
MSG= clears the message bit(s) matching the true bits in the message
byte <state>. The television demodulator must be in the remote state
to use the MSG= command.
Syntax
MSG=<state>
MSG?
Arguments
<state> is 1h to FFh. FFh clears all message bits.
DS1000 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix B: Remote Control
B–21
Advertisement
Table of Contents
