Revolabs 10-FLX2-020-VOIP System Manual page 50

be used. Please note that your IP
PBX might override the Display
name sent by the FLX and replace
it with names configured in the
PBX.
iv. 'Username' is the extension off the
IP PBX this phone will be reached
under
v. 'Password' is the password used
by the Username to logon to the
IP PBX.
vi. If any value was changed, a sixth
option 'Load Settings' is offered.
This will reboot the FLX Base
Station, applying the changed
settings.
d. Voice VLAN allows changing VLAN settings.
Highlight the 'Mode' field and press Enter to switch
between the three options. 'Auto' will
automatically determin whether a VLAN is
in place, and request the VLAN identifier
from the network. 'Enabled' will enable the
VLAN, but requires a VLAN identifier to be
manually set in the Voice VLAN ID menu.
'Disabled' means that no Voice VLAN is in
use.
Language / Region
1. Browse to the Network Settings menu: Menu 
Setup  Advanced Setup  Language/Region.
a. The Language submenu allows selecting
the dialer language from one of the six
supported languages: The options are
English, Español (Spanish), Français
(French), Deutsch (German), Italiano
(Italian), and Português (Portuguese).
Highlight the language of your choice, and
press either "Enter" or "Select" on the
Dialer to select it. Once a language is
select, the system will use that language for
all screen contents.
b. The Country/Region submenu allows
50