Table of Contents
Advertisement
Aux Audio
'Aux Audio' is to control the AUX In and AUX Out
connectors on the base.
1.
Aux In ON/OFF and Aux Out ON/OFF allow
enabling / disabling the Aux connectors of
the FLX phone.
2.
Aux In Level allows changing the level of
the Aux In signal.
3. Aux Out Level allows changing the level of
the Aux Out signal.
4.
Aux Out – MIC / LINE allows setting the
level of the Aux Out connectors to either
Mic level or Line level.
RF Power
The RF Power level setting allows changing the
signal strength of the base station and microphones.
Factory default is HIGH. Low or medium can be
selected to reduce the signal strength. Lower signal
strength reduces the maximum distance between
base station and any of the wireless devices. A
lower setting might be desirable in environments
where a lot of DECT traffic is encountered.
1. Browse to the RF Power menu: Setup
Advanced Setup RF Power.
2. The user can select low or high RF Power .
45
Advertisement
Table of Contents
