Revolabs 10-FLX2-020-VOIP System Manual page 44

Wireless conference system for voice over ip
Hide thumbs Also See for 10-FLX2-020-VOIP:
Table of Contents

Advertisement

4. To set the time before the call is forwarded to the 'No Answer' number, select 'No
Answer Delay' and set the time in seconds.
Advanced Setup
The following is a list of advanced configuration settings
that are protected by a 4 digit password for administrator
access only. The default password is 7386 (revo). This
password should be changed by the system
administrator. Please ensure that you take note of the
changed password.
Advanced Audio
Browse to Advanced Audio menu: Menu Setup
Advanced Setup Advanced Audio.
Mic Audio
The 'Mic Audio' allows controlling the Microphones.
1. If 'All Mic Mute' is ON, all active Microphones are
affected when a mute button is pressed. If one
or more active Microphones are outside the
Charger Base, pressing the mute button will
change the mute status on all Microphones
outside of the Charger Base. Microphones in the
Charger Base will not be affected and will remain
off or stay muted at all times. If all Microphones
are in the Charger Base, pressing the mute
button will change the mute status of all
Microphones in the Charger Base. The factory
default for 'All Mic Mute' is OFF.
2. The 'Start Unmute' feature allows the
Microphones to come out unmuted when taken
out of charger. The factory default is ON.
44

Advertisement

Table of Contents
loading

Table of Contents