Brother HL-2230 Service Manual page 151

5) Network Default Settings (Network Model only)
6) Factory Reset
7) Settings Reset
Delete area of each reset is as follows.
Data item
Printer switch
- Counter information
Error history
MAC address
User switches (Items to be initialized
when resetting to the factory default
settings)
Function settings except user switches
(Items except the factory default
settings)
- Languages
- Reprint
- Interfaces
Macro/Font
LAN area (Network settings)
PCL core area (Emulation settings)
8) Engine Error Ignoring Mode
Even when the engine error occurs and the main PCB ASSY exchange is required for
recovery, the printer can be started, ignoring the engine error if this mode is used.
EEPROM data can be obtained.
9) One Push Printing Recovery Function
The One Push Demo function is to implement demo printing by pressing the [Go] button,
which is mainly used for sales promotion at the shop. It is disabled if printing from a
computer even once.
This mode enables to recover One Push Printing. However, the design of printing is not
demo page printing, but test printing after the recovery.
Network
Factory
default
settings
5-6
Settings
reset reset
Confidential