Setting The Default Paper Size - Brother HL-2440 Service Manual

■ Setting the default paper size

<Procedures>
(1) Open the "hl2000" folder and double-click the FILEDG32.EXE icon to start. Select the
applicable machine and click it. (Make sure that there is the icon of the connected
machine and that no error occurs.)
(2) Drag "s2100EUR" (A4 size), "s2100USA" (Letter size) or "s2100ISR" (A4 size, Israeli
font for Israel) in the same folder and drop it onto the icon of the applicable model in
FILEDG32. When the Ready LED of the machine lights up for an instant and goes off
immediately after dropping it, the setting is completed. Then, set the serial number
following the steps described in the next section.
4-7
Confidential