Brother HL-2230 Service Manual page 124

(3) Place the printer so that the Main frame L ASSY is at the top.
(4) Remove the LVPS harness ASSY from the Guide of the Main frame L ASSY.
(5) Remove the Taptite bind B M4x12 screw 5a (for Under bar).
(6) Remove the Taptite cup S M3X6 SR screw 6a (for Chute ground plate), the Taptite bind B
M4x12 screw 6b (for PF frame ASSY) and the Taptite cup S M3x6 SR screw 6c (for FG
plate laser L).
(7) Release the Hook to remove the Feeder gear 17.
(8) Turn the Feeder cam lever to the direction of the arrow, and remove the Taptite bind B
M4x12 screw 8.
(9) Remove the Taptite bind B M4x12 screw 9a and the two Taptite cup S M3x6 SR screws 9b
to remove the Main frame L ASSY.
Taptite bind B M4x12 (9a)
Taptite bind B M4x12
(6b)
Taptite cup S M3X6 SR
(6a)
Chute ground plate
Printer top side
(Printer body
upside down)
FG plate MAIN PCB
Taptite bind B M4x12
(5a)
Chute ground plate
Assembling Note:
• When assembling the Main frame L ASSY, check that there is the Chute ground plate
on the upper side of the FG plate MAIN PCB.
LVPS harness ASSY
Under bar
Fig. 3-53
3-54
Taptite cup S M3x6 SR (9b)
Taptite cup S M3x6 SR (6c)
Main frame L ASSY
Feeder gear 17
Taptite bind B M4x12 (8)
Feeder cam lever
Confidential