Grandstream Networks GXW-4024 Quick Install Manual page 4

Connect the GXW40xx
Please use the equipment included in the packaging. Using any other power source may
damage the product.
1. Connect one or more standard touch-tone analog telephones (or fax machine) to FXS ports.
2. Connect a PSTN telephone line to LINE port (optional, GXW4004/4008 only).
3. Insert the Ethernet cable into the WAN (GXW4004/4008) or LAN (GXW4024) port and connect
the other end of the Ethernet cable to an uplink port (a switch, router or a modem, etc.).
4. Connect a PC to the LAN port (optional, GXW4004/4008 only).
5. Insert the power adapter into the GXW40xx and connect it to an electrical outlet.
6. Using the GXW40xx embedded web server or IVR (Interactive Voice Prompt) menu, you can
further configure the device using either a static IP or DHCP.
Configuring the GXW40xx using a Web Browser
1. From the analog phone, press *** to get into the IVR menu. Enter option 02
(GXW4004/4008) or 002 (GXW4024) to obtain the GXW40xx's IP address.
2. For GXW4004/4008, please enable the "WAN side HTTP/Telnet access" option by
entering IVR option 12 and press 9. A reboot or power cycle of the device is required this
change. You can also access the GXW4004/4008's web configuration from a PC
connected to the LAN port via 192.168.2.1.
3. Type the GXW40xx's IP address in your PC browser.
4. Log in using password "admin" to configure the unit.
You will need the following information to configure the GXW40xx via the web browser:
1. IP address, subnet mask and gateway IP if using static IP.
2. SIP server and/or Outbound Proxy FQDN or IP address.
3. User subscriber information: User ID, Authentication IP, Password (provided by your VoIP
Grandstream Networks, Inc., 1297 Beacon St., 2
Tel: (617) 566-9300, FAX: (617) 249-1987
nd
Flr, Brookline, MA 02446 USA
www.grandstream.com