Network Connection; Power Connection - Advantech EKI-2525PA User Manual

2.4 Network Connection

The EKI-2525PA has 5 x RJ-45 ports that support connection to 10 Mbps Ethernet, or
100 Mbps Fast Ethernet, and half or full duplex operation. EKI-2525PA can be
connected to other hubs or switches through a twisted-pair straight through the cable
or a crossover cable up to 100m long. The connection can be made from any TX port
of the EKI-2525PA (MDI-X) to another hub or switch either MDI-X or uplink MDI port.
The EKI-2525PA supports auto-crossover to make networking more easy and flexible.
You can connect any RJ-45 (MDI-X) station port on the switch to any device such as a
switch, bridge or router.

2.5 Power Connection

The EKI-2525PA supports dual 24/48 V
Figure 2.8: Pin Assignment of the Power Connector
You can connect an alarm indicator, buzzer or other signaling equipment through the
relay output. The relay opens if power input 1 or 2 fails ('Open' means if you connect
relay output with an LED, the light would be off).
EKI-2525PA User Manual
power inputs and power-fail relay output.
DC
16