Table of Contents
Advertisement
5.
Flat screen alignment.
Z axis adjustment knob
X axis adjustment knob
Y axis adjustment knob
Y axis adjustment knob
2
D
Level
Plumb
5.1 Hook the first flat screen onto the bottom left wall plate first. Keep the x axis knobs between
the middle of the two interface arms (part 2).
5.2 Check the horizontal centre of the flat screen is aligned with the horizontal centre of the wall
mount.
5.3 Using a level, align the flat screen parallel to the floor using the Z axis adjustment knobs.
5.4 Use the Y axis knob to ensure that each corner of the flat screen is equidistant from the wall.
5.5 Use a plumb to align the first column of flat screens and leave at least a 1mm gap between
them.
5.6 Hook on the remaining flat screens leaving at least 1mm gap between them.
5.7 When the monitors are all positioned correctly, tighten the safety screws (D) which were
previously loosened.
11
Advertisement
Table of Contents
