Setting The Item Order On The Node & Room List - Yaesu FTM-400XD Instruction Manual

5
Rotate or touch the screen to select [PRESET
FREQUENCY]
6
Touch [PRESET FREQUENCY]
The frequency number will become orange.
Tip The default setting is 145.780.
7
Rotate to select a frequency
Tip If you press and hold
frequency will change by 5 MHz increments. If you press
flash. If you rotate
MHz increments within the currently displayed frequency range. Press
the kHz indication, and the frequency indication will light up.
8
Touch [PRESET FREQUENCY]
The frequency will be set and the frequency number
will become green.
9
Press and hold
The screen will return to the previous screen.
Tip You can also go back to the previous screen by touching [BACK] twice.
Setting the item order on the node & room list
You can select the criteria to sort the list of connection destinations on the Internet.
1
Press and hold
The setup menu will appear.
2
Touch [WIRES]
The menu list will appear.
for 2 seconds or more, the kHz indication will disappear and the
while the frequency indication is flashing, the frequency will change by 1
for 1 second or more
for 1 second or more
again, the frequency indication will
51
WIRES-X Setup Menus
once again to display