Setting The Item Order On The Node & Room Lists; Editing Category Names; Deleting The Registered Nodes And Rooms - Yaesu FT3DR Instruction Manual

Setting the item order on the node & room lists
You can select the criteria to sort the list of connection destinations on the Internet.
1
Press and hold the [DISP] key → Touch [WIRES-X] → [2 SEARCH SETUP].
2
Rotate the DIAL to select [HISTORY] or [ACTIVITY].
Every time the DIAL is rotated, the setting switches
between [HISTORY] and [ACTIVITY].
HISTORY: Displays the list sorted in order of the
connection destination that your station
most recently connected to.
ACTIVITY: Displays the list sorted in descending
order from the room with the most nodes
connected. Nodes come after rooms.
3
Press the PTT.
Sets the frequency and returns the screen to the frequency display screen.

Editing category names

You can name 5 categories where nodes and rooms are registered. Up to 16 alphanumeric
characters can be used for each category name.
For details, refer to "Registering a node or room" on page 16.

Deleting the registered nodes and rooms

You can delete nodes and rooms registered in the 5 categories.
1
Press and hold the [DISP] key → Touch [WIRES-X] → [4 REMOVE ROOM/NODE].
2
Rotate the DIAL to select the desired category, then
press the [DISP] key.
Displays the node and room lists.
3
Rotate the DIAL to select the node or room you want
to delete, then press the [DISP] key.
The confirmation message appears.
4
Touch [OK].
Deletes the selected node or room.
5
Press the PTT.
Sets the frequency and returns the screen to the frequency display screen.
37
2 SEARCH SETUP
HISTORY
4 REMOVE ROOM/NODE
C1:TOKYO AREA
C2:FISHING
C3 ----------------
C4 ----------------
C5 ----------------
4 REMOVE ROOM/NODE
TOKYO AREA
JA1YOE-ROOM-A
JQ1YBG-ND
JA1YOE-ROOM12345