Date And Time; Date And Time - Panasonic KX-TSC909CID Operating Instructions Manual

Programmable Settings

Date and Time

Set the clock with either the base unit or the cordless handset. You do not need to
program both on the base unit and the cordless handset.
Base Unit
1
Press [FUNCTION/EDIT].
2
Scroll to "Date and time" by pressing [ ]
or [ ], then press [ ].
3
(1) Enter the year, and month and day using
4-digit numbers. (Ex. To set Apr. 7, 2003,
enter "2003" and "0407".)
(2) Enter the time (hour and minute) using a
4-digit number. (Ex. To set 9:30, enter
"0930".)
• If you enter a wrong number, press [ ] or [ ] to
move the cursor to the incorrect number. Enter
the correct number.
4
Select "AM" or "PM" by pressing [ ].
5
Press [ ] (Save).
• If 3 beeps sound, the setting is not correct. Start again from step 3.
• The clock starts working.
6
Press [STOP].
• When entering the time, you cannot enter numbers greater than 12. Do not use
military time. (To set 13:00 hours, enter "0100", and select "PM"
Handset
: Press [CONF/FUNCTION], and follow steps 2 to 4 above, using
the cordless handset. Press the soft key (
If a power failure occurs, the time setting may be incorrect. When "
on the base unit display, adjust the date/time.
For Caller ID service users (p. 28)
• Caller ID information will reset the clock after the first ring if the adjusted time is
incorrect.
• If the time has not previously been set, the Caller ID information will not adjust
the clock.
• Caller ID information will automatically adjust the clock for daylight saving time.
16
(use either
Base Unit
or
Handset

Date and time

Date:2003.12.31
Time:12:00 AM
0-9=Date&Time
=AM/PM
Date:2003.04.07
Time:09:30 AM
0-9=Date&Time
=AM/PM
), then press [OFF].
SA VE
)
2
=Save
AM
=Save
.)
" flashes