Setting The Mailbox Password; (For Mailbox 2 And 3); Set Answering; Set Mailbox2&3 - Panasonic KX-TSC909CID Operating Instructions Manual

Mailbox Features

Setting the Mailbox Password

(use either
You can use Mailbox 2 or 3 for your personal mailbox, and prevent unauthorized
people from accessing your mailbox and listening to your messages. Assign a
2-digit password (00–99) to Mailbox 2 or 3. Each password and the remote code
(p. 60) must be unique. Once a password is assigned to Mailbox 2 or 3, no one can
listen to messages without entering the password.
Base Unit
1
Press [FUNCTION/EDIT].
2
Scroll to "Initial setting" by pressing
[ ] or [ ], then press [ ] .
3
Scroll to "Set answering" by pressing [ ]
or [ ], then press [ ] .
4
Scroll to "Set mailbox2&3" by pressing
[ ] or [ ], then press [ ] .
5
Select the mailbox by pressing [ ] (Mailbox
2) or [ ] (Mailbox 3).
6
Enter a 2-digit password (00–99).
• If you entered a wrong number, press [ERASE]
and enter the password again.
7
Press [ ] (Save).
• If 3 beeps sound, you entered the same password as the other mailbox or
the remote code (p. 60) or the entered password was one-digit. Start again
from step 6 and select another password.
8
Press [STOP].
To check the password, repeat steps 1 to 5.
• The password is displayed. When finished, press [STOP].
To erase the password
Press [ERASE] in step 6, press [ ] (Save), then press [STOP].
• You can access the mailbox without entering the password.
Handset
: Press [CONF/FUNCTION], and follow steps 2 to 6 above, using
the cordless handset. Press the soft key (
• To erase the password, press [HOLD/CLEAR] in step 6, press the soft key
( )
, then press [OFF].
SA VE
52
or
Base Unit Handset

(for Mailbox 2 and 3)

)
Initial setting

Set answering

Set mailbox2&3
Set password
Ex. Entered 22.
Set password
Mailbox2
), then press [OFF].
SA VE
=Mailbox2
=Mailbox3
:22