Using The Pause Button; Pbx Line/Long Distance Calls); Incoming Call Tone; Incoming Call - Panasonic KX-TSC909CID Operating Instructions Manual

Using the PAUSE Button

Calls)
Base Unit Handset
We recommend you press [REDIAL/PAUSE] on the base unit or [PAUSE/REDIAL]
on the cordless handset if a pause is required for dialing with a PBX or to make a
long distance call.
Ex. Line access number [9] (PBX)
[9] [REDIAL/PAUSE] or [PAUSE/REDIAL]
• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] once creates a 3.5 second
pause. This prevents misdialing when you redial or dial a stored number.
• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] more than once increases the
length of the pause between numbers.

Incoming Call Tone

During an intercom call, while using the Room Monitor feature, or while listening to
messages, you can be informed by two tones if a call arrives.
If you set incoming call tone to ON, this incoming call tone will be heard for as long
as the line rings. To bypass the incoming call tone, set it to OFF. To set the incoming
call tone to sound twice, set to "2". The factory preset is "2".
You can set the incoming call tone on the base unit or the cordless handset
separately.
1
Base unit: Press [FUNCTION/EDIT].
Cordless handset: Press [CONF/FUNCTION]
2
Scroll to "Ringer setting" by pressing
[ ] or [ ], then press [ ].
3
Scroll to "Incoming call" by pressing [ ]
or [ ], then press [ ].
4
Select "On", "Off" or "2" by pressing [ ] or
[ ].
5
Base unit: Press [ ] (Save), then press [STOP].
Cordless handset: Press the soft key (
• You can also set the incoming call tone for the base unit, by using the cordless
handset. Perform the following steps:
(1) Press [CONF/FUNCTION].
(2) Scroll to "Initial setting" by pressing [ ] or [ ], then press [ ].
(3) Scroll to "Set base unit" by pressing [ ] or [ ], then press [ ].
(4) Press [ ] at "Incoming call".
(5) Select "On", "Off" or "2" by pressing [ ] or [ ], press the soft key (
and press [OFF].
For assistance, please call: 1-800-211-PANA(7262)
(For PBX Line/Long Distance
Base Unit Handset
SA VE
Special Features
Phone number
.
Ringer setting

Incoming call

Incoming call
tone :2
), then press [OFF].
),
SA VE
49