Table of Contents
Advertisement
Questions and Answers
Q: The fan continues to rotate after
A: After using oven, the fan motor
may rotate to cool the electrical
components. This is normal and
you can continue using the oven at
this time.
Q: Can I check the pre-set oven
temperature while cooking or
preheating by convection?
A: Yes. Touch Convection and the
oven temperature will appear in the
display window for 2 seconds.
Q: "D" appears in the display and the
A: The oven has been programmed
in demo mode. This mode is
designed for retail store display.
Deactivate this mode by touching
microwave once and Stop/Cancel
key 4 times.
Q. The word prompt has disappeared
on my display, I can only see
A: There may have been a power
failure, and the wordprompt is
disabled. Unplug the oven for a
few seconds, then plug it in again.
When "88:88" is displayed, tap Start
displayed. Then set the clock. Refer
to page 21-22.
62
EN
Q. The control panel keys do not
A: Ensure the oven is plugged in.
The oven may be in stand-by
mode. Open and close the door to
activate.
Q. The oven stops cooking by steam
or combination with steam and U14
appears in the display.
A: The water tank is empty and the
operation guide has been turned
back in the oven and touch Start/
Advertisement
Table of Contents
