Shock And Vibration; Physical Characteristics; Safety; Electromagnetic Compatibility - National Instruments UMI-7664 User Manual And Specifications

Table of Contents

Advertisement

Shock and Vibration

Operating shock (IEC 60068-2-27)
Panel mount ...................................................30 g, 11 ms half sine, 3 shocks
Operating vibration, random (IEC 60068-2-34)
DIN rail ..........................................................1 g RMS, 10–500 Hz at 0.002 g
Panel mount ...................................................5 g RMS, 10–500 Hz at 0.01 g
Operating vibration, sinusoidal (IEC 60068-2-6)
Panel mount ...................................................5 g, 10–500 Hz

Physical Characteristics

Weight ....................................................................2.5 lbs
Dimensions
Length ............................................................ 259.08 cm (10.200 in.)
Width.............................................................. 126.93 cm (5.00 in.)
Depth.............................................................. 22.01 cm (0.867 in.)

Safety

This product meets the requirements of the following standards of safety for electrical equipment for
measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or the
Certification
section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for electrical equipment for
measurement, control, and laboratory use:
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
Caution
When operating this product, use shielded cables and accessories.
Note
For EMC declarations and certifications, refer to the

CE Compliance

This product meets the essential requirements of applicable European Directives, as follows:
2006/95/EC; Low-Voltage Directive (safety)
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
© National Instruments Corporation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Online Product Certification
37
NI UMI-7774/72 User Guide and Specifications
2
/Hz
2
/Hz
Online Product
section.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Umi-7772Umi-7774

Table of Contents