Table of Contents
Advertisement
Specifications
The following table lists the general specifications for the MVME712M
Transition Module. The subsequent sections detail cooling requirements
and FCC compliance.
A complete functional description of the MVME712M appears in
2.
Characteristics
Power requirements
I/O ports
Operating temperature
Storage temperature
Relative humidity
Physical
characteristics
(excluding front panel)
http://www.mcg.mot.com/literature
Table 1-1. MVME712M specifications
Specifications
+5 Vdc
+12 Vdc
Note:+5 Vdc, +12 Vdc, -12Vdc power
supplied by backplane. Used for
internal modem interface.
Serial
(connected through P2 adapter board)
Printer
(connected through P2 adapter board)
entry of forced air (approximately 5
CFM)
5% to 90% (non-condensing)
Height
Depth
Thickness
281 mA maximum
255 mA typical
-12 Vdc
Four multiprotocol serial ports
Centronics printer port
0 degrees to 55 degrees C at point of
-40 degrees to 85 degrees C
9.187 inches (233.35 mm)
3.200 inches (80.0 mm)
0.063 inches (1.6 mm)
Specifications
1
Chapter
1-3
Advertisement
Table of Contents
