Table of Contents
Advertisement
Section 3 - Configuration
This section allows you to configure the IP settings for your
wireless network.
IP
4
V
IP Address:
Enter the IPv4 address for your Wi-Fi network. If you change
this address, you will need to enter the new address in your
web browser's address bar in order to access the web-based
configuration utility.
IP Subnet Mask:
Enter the IPv4 subnet mask for your Wi-Fi network.
Click Apply to save the current configuration.
IP
6
V
IPv6 Address:
Enter the IPv6 address for your Wi-Fi network.
Prefix for LAN:
Enter the prefix to be used to delegate IPv6 addresses to the
LAN.
RA Autonomous:
Check the box to set the router announcement mode to
autonomous.
RA On-Link:
Check the box to enable router announcement on-link
Click Apply to save the current configuration.
DNS N
AME
DNS Device Name:
Enter your router's DNS device name in the field provided.
Click Apply to save the current configuration.
D-Link DWR-830 User Manual
Wi-Fi
33
Advertisement
Table of Contents
