Using Windows Vista - D-Link WR830A1 User Manual

Section 4 - Connecting to a Wireless Network

Using Windows Vista™

Windows ® Vista ™ users may use the built-in wireless utility. If you are using another company's utility or Windows ® 2000, please refer to the user
®
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows
Vista ™ utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the center of
the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right corner
next to the time). Select Connect to a network.
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check the TCP/IP settings
for your wireless adapter. Refer to "Networking Basics" on page 90 for more
information.
D-Link DWR-830 User Manual 80