Connect Via Wi-Fi - D-Link WR830A1 User Manual

Section 2 - Installation

Connect via Wi-Fi

Note: The following example uses Windows 7's built-in wireless connection utility. If you are using a different operating system, or a third party
connection utility, the process may be different. Please refer to the documentation that came with your operating system or wireless client for
further information on how to connect to a wireless network.
To connect to the router using Wi-Fi, open your operating system's wireless networking utility
and scan for available networks to connect to. By default, the network name (SSID) of the
DWR-830 will be in the format dlink_DWR-830xxxx , where "xxxx" represents the last four
character's of the router's MAC address.
Once you have located this network with your wireless utility, connect to the network using
your wireless networking utility.
D-Link DWR-830 User Manual 10