Table of Contents
Advertisement
Section 3 - Configuration
This section allows you to configure your router's DHCP server for the IPv6 protocol. To edit any of the fields under this tab,
click on the field that you wish to edit, and a text box will appear. Click OK at the bottom of each section to save that particular
rule or configuration.
O
PTIONS
DUID-LLT:
Displays the router's DHCP Unique Identifier.
Enable:
Check the box to enable the router to operate as a DHCPv6
server and issue DHCPv6 IP addresses to requesting clients.
DNS Mode:
Select the preferred Domain Name Server (DNS) mode from
the drop down menu. Select Manual to manually enter DNS
information. Select Proxy to use a proxy server to resolve the
DNS information.
DNS Server:
If you selected Manual above, select whether you want to
use None, From ISP, or User Defined for your domain name
server. Enter the address of your DNS in the field provided.
Domain Name:
Enter the DNS search path for your domain. From the drop-
down menu on the left, select Y to activate the setting, or N
to deactivate it.
NTP Server:
Select IP Address from the drop-down menu and enter the
IP address of an NTP server which will provide IPv6 Network
Time Protocol information to IPv6 hosts.
D-Link DWR-830 User Manual
DHCPv6
36
Advertisement
Table of Contents
