Table of Contents
Advertisement
Section 3 - Configuration
A
P
DDRESS
OOL
This tab allows you to specify address ranges for the DHCPv6
address pool. These addresses will be assigned to DHCPv6
clients that request an IPv6 address from the DHCP server.
Active:
Check the box to activate the address pool rule.
Start Address:
Enter the starting IPv6 address for the pool range.
End Address:
Enter the ending IPv6 address for the pool range.
Preferred
Enter the preferred lifetime for addresses in the DHCP pool.
Lifetime:
Valid Lifetime:
Enter the valid lifetime for addresses in the DHCP pool. This
value should be larger that the preferred lifetime.
Click OK to save the DHCP address pool rule. Click Apply to
save the current settings.
P
C
ARTICULAR
LIENT
Active:
Check the box to activate the rule.
DUID-LLT:
Enter the DHCP Unique Identifier (DUID) for the rule.
Security:
Check the box to enable security on this rule. Enter the ID,
Realm and Key for security using the DUID.
Click OK to save the current configuration.
D-Link DWR-830 User Manual
38
Advertisement
Table of Contents
