Table of Contents
Advertisement
Section 3 - Configuration
The MAC filter lets you to allow or deny access to your wireless network based on a client's MAC address.
Click Add to add a new MAC filtering rule.
Blacklist/
Select Blacklist to deny access to only the MAC addresses
Whitelist:
listed below. Select Whitelist to allow access to only the MAC
addresses listed below.
Active:
Check the box to activate the MAC filter rule.
Source MAC:
Enter the MAC address of the machine or device which you
wish to filter packets coming from.
Destination MAC:
Enter the MAC address of the machine you wish to filter
packets.
Day:
Check the box for each day that you wish to activate the MAC
filtering rule.
Start Time:
Enter the starting time at which you wish to activate the MAC
filtering rule each day.
End Time:
Enter the ending time at which you wish to deactivate the
MAC filtering rule each day.
Delete:
Click the icon to delete this MAC filtering rule.
Click OK to add the current rule to the rules list. Click Apply
to save the current configuration.
D-Link DWR-830 User Manual
MAC Filter
61
Advertisement
Table of Contents
