Kyocera AD-63 Service Manual page 22

2FD/2FF/2FG
1-3-1 Unpacking and installation
(1) Installation procedure
Start
Unpack.
Remove the tapes and pad.
Install the optional paper feeder or
Carry out initial developer setting
large paper deck.
(maintenance item U130).
Remove the pins holding light source units 1 and 2.
Load paper.
Install the original cover or the DP.
Output an own-status report
(maintenance item U000).
Install other optional devices.
Exit maintenance mode.
Install the toner container.
Print out the user setting list.
Install the toner disposal tank.
Make test copies.
Connect the power cord.
Completion of the machine installation.
1-3-1