Advertisement
Chapter 3: Mounting
Rear VESA Mount
For the 15 inch touchmonitor, a four-hole 75x75mm mounting pattern for M4 screws is provided on
the rear of the monitor. Remove the stand using a Phillips screwdriver to access this mounting
interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C.
An optional filler plate is available for purchase separately to use with the VESA mount:
E000404 (Black)
E000420 (White)
User Manual: 1517L, 1717L
SW601708 Rev E, Page 8 of 25
Advertisement
