Advertisement
Base Mount
For the 15 inch touchmonitor, a threaded three-hole mounting pattern for M4 screws is provided
on the bottom of stand base for mounting or securing. An additional two-hole pattern is available
under small caps on the top of the base. See page 15 for instructions on how to access holes.
For the 17 inch touchmonitor, a threaded three-hole mounting pattern for M4 screws is provided
on the bottom of stand base for mounting or securing. An additional two-hole pattern is available
under small caps on the top of the base. See page 15 for instructions on how to access holes.
User Manual: 1517L, 1717L
SW601708 Rev E, Page 10 of 25
Advertisement
