Advertisement
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the VGA video cables between the monitor's VGA input connectors and your VGA
video source, respectively. Tighten the video cable's screws for best performance.
2. Connect the USB/serial touch cable between the monitor's USB/serial connector and your
PC's USB/serial port.
3. Select the correct power cable for your region. Connect the power cable between the AC
power source and the monitor's AC input power jack.
4. Alternatively, if you have purchased an optional power adapter and elected to use it, connect
the cable between the AC power source and the optional power adapter's input connector.
Connect the power adapter's DC output connector to the monitor's DC input power jack.
5. The touchmonitor ships in an OFF state. Press the power button to turn it on.
User Manual: 1517L, 1717L
SW601708 Rev E, Page 6 of 25
Advertisement
