Download Print this page

Maintenance - Extech Instruments MA435T-NIST User Manual

400amp true rms ac/dc clamp meter

Advertisement

Maintenance

WARNING: To avoid electrical shock, disconnect the meter from any circuit, remove the test leads
from the input terminals, and turn OFF the meter before opening the case. Do not operate the meter
with an open case.
Cleaning and Storage
Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or
solvents. If the meter is not to be used for 60 days or more, remove the battery and store it
separately.
Battery Replacement
1.
Remove the Phillips head screw that secures the rear battery cover
2.
Open the battery compartment
3.
Replace the 9V battery.
4.
Secure the battery compartment door
nd Quality Products Online at:
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate
collection sites, the retail store where the batteries were purchased, or wherever
batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated
to take end-of-life devices to a designated collection point for the disposal of electrical
and electronic equipment.
Other Battery Safety Reminders
o Never dispose of batteries in a fire. Batteries may explode or leak.
o Never mix battery types. Always install new batteries of the same type.
GlobalTestSupply
www.
9
.com
MA435T‐en‐GB_v1.4   10/16 
sales@GlobalTestSupply.co

Advertisement

loading

This manual is also suitable for:

Ma435t