TD92 Operator's Manual
INTERMEDIATE BEARING – 8h / Daily (1 Location)
When performing daily greasing routine, ensure all grass
clippings are removed from the mower decks. Clipping build-
up can cause overheating of the bearings and belts leading to
premature wear and subsequent failure.
DECK WHEELS & PIVOTS: As Required
The deck wheels have greaseable tapered roller bearings, and all
pivot points on the deck floatation have grease fittings. They should
be greased frequently as required.
TRANSPORT HUBS & OTHER LOCATIONS: As Required
All pivot locations have grease fittings. These include the wing
hinge pivots, the transport wheel hubs, the rotating hitch and the
hitch clevis. Lubricate these areas per the recommended schedule
32