Zephyr Essentials Pisa ZPI-E30AG Use, Care And Installation Manual page 14

Fig.7
24" Models Only
M4x8 screw into each lower installation bracket. The
position of this screw is adjustable to accomodate various
cabinet bottom thicknesses, Fig.7.
30" & 36" Models Only. Secure hood body to cabinet
range hood.
24" Models Only
captive nuts of each upper installation bracket. Tighten
screws to adjust the height of the range hood until there
is no gap between the cabinet and front edge of the hood,
Fig.8.
12
www.zephyronline.com
Fig.8
A