Network Connection Status - Epson TM-L100 Technical Reference Manual

Bluetooth Wi-Fi Ethernet
LED LED
O O
O O
- -
- -
*1: The Power LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.
*2: The Power LED flashing pattern is: lighting for 160 ms followed by a pause for 2400 ms.
*3: The Power LED flashing pattern is: lighting for 4960 ms followed by a pause for 160 ms.
*4: The Error LED flashing pattern is: lighting for 320 ms, pause for 320 ms, lighting for 320 ms, and pause for 1600 ms.

Network Connection Status

Bluetooth Wi-Fi Ethernet
LED LED
-
F
-
O
-
O
-
O
-
N
-
F
-
F
-
N
-
O
*The LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.
Paper
Error
LED LED
LED
O O N
O O O
- - -
- F *1
N
Paper
Error
LED
LED
LED
- -
F
- -
O
- -
N
- -
F
- -
O
- -
O
- - -
- - -
- - -
Power
LED
Printer Status
F *1 During turn-off process
During power off
NOTE:
When a power off command is executed.
F *2
When turning off the printer without using the
power button, using the command is
recommended because doing so reliably saves
printer operating status information.
Starting up the network firmware
N
Waiting for the roll paper cover to be closed to
N
print a status sheet.
O: OFF N: ON F: Flashing
Power
LED
Printer Status
Starting the network firmware
N
Not connected to a network
N
Connecting via Ethernet
N
Ethernet (An IP address has not been acquired)
N
Connecting via Wi-Fi
N
Wi-Fi (An IP address has not been acquired)
N
Waiting to be paired with a device
N
Connecting via Bluetooth
N
Not connected via Bluetooth
N
Chapter 1 Product Overview
: Ignore the LED light
-
21