Environmental Conditions - Epson TM-L100 Technical Reference Manual

Environmental Conditions

Temperature Operating
/ Humidity
Storage
Vibration When packed
resistance
Shock When packed
resistance
When
unpacked
Noise Operating
Waterproof
performance
Altitude
When using plain thermal paper
5 to 45 degrees C, 10 to 90% RH, non condensing
[%RH]
90
80
60
40
20
10
0
0 10
When using liner-free label paper
Temperature and humidity range guaranteed by the liner-free label paper.
-10 to 50 degrees C, 10 to 90% RH (excluding paper)
Frequency: 5 to 55 Hz
Acceleration: Approx. 19.6 m/s
Sweep: 10 minutes (half cycle)
Time: 1 hour
Orientation: x, y, and z
After being subjected the vibration, there should be no visual or operational problems
on the exterior or interior.
Packing: Epson standard package specifications
Height: 60 cm {23.62"}
Orientation: 1 corner, 3 edges, and 6 surfaces
After being dropped, there should be no visual or operational problems on the exterior
or interior.
Height: 5 cm {1.97"}
Orientation: Lift one edge and release it (for all 4 edges)
After being dropped while not operating, there should be no visual or operational
problems on the exterior or interior.
Approx. 52 dB (ANSI bystander position)
Note: The above noise value is based on Epson evaluation conditions.
Noise varies depending on the paper used, printing contents, and the setting values,
such as print speed or print density.
Equivalent to IP22 (only when installed vertically)
Note: This is the result of an evaluation conducted by a third party evaluation
organization based on JISC0920 (IEC60529:2001), and does not guarantee
conformance to the standard, no damage, or no failure.
Approx. 3,000 m or less
34°C, 90%
40°C, 65%
45°C, 50%
Operating
environment
range
20 30 40 50
Ambient temperature
2
{2G}
Appendix
[°C]
130