Epson TM-L100 Technical Reference Manual page 89

Power supply SW setting
• Enabled (initial setting)
• Disabled
Refer to "Precautions when Developing Applications" on page 116
"Power supply SW setting".
Pre-feed before next print
Selectable from 0 dot (disabled), 1 dot, 2 dot, 3 dot, 4 dot, 5 dot, and 6 dot.
Initial setting: 2dot
Paper initialization when power ON
• Enabled (initial setting)
• Disabled
Periodic time of paper initialization
Selectable from "Disabled" and 1 to 720 minutes
Initial setting: 720 minutes
Black mark control
• Disabled (initial setting)
• Enabled
Setting the conditions that cancel the receive buffer BUSY state
• Cancels the BUSY state when the remaining capacity of the receive buffer reaches 256 bytes (initial setting)
• Cancels the BUSY state when the remaining capacity of the receive buffer reaches 138 bytes
Chapter 4 Advanced Usage
for precautions on using the
89