Error Messages - Safescan 2610 User Manual

ENGLISH
2.3
Use the arrow keys to increase or decrease the batch number 1 piece, starting from the number that is blinking.
When the display shows '50', you can go to 51, 52 etc. by pressing
5 seconds after you have made your choice, the number stops blinking and your batch number is saved.

ERROR MESSAGES

The machine will give you a clear audibe and visual notification when a suspected banknote is detected or when a
banknote is detected which differs in height from the other notes that are being counted (SORT mode). The following
messages can be shown:
UV SU S P E C TE D
Counterfeit or suspicious banknote: UV features not
detected. Remove the suspect banknote from the
stacker and press START to continue.
H E IGH T E R R O R
M G S U S P E C T E D
A banknote with a different height has been detected.
Remove the different banknote denomination, remove
the counted notes and re-count the bundle.
10
H E IGH T E R R OR
BA TCH
51
ALL
UV S U S PE C TE D
MG S U S PE C T ED
www.safescan.com
AUT O S OR T
Counterfeit or suspicious banknote. MG features not
detected. Remove the banknote from the stacker and
press START to continue (Safescan 2650 only).
Sometimes banknotes are stuck or folded together.
Check the banknotes and re-count. If this error message
occurs frequently, adjust the hopper adjustment wheel
slightly (+).
and to 49, 48 etc. by pressing
MG SU SP E C T E D
HE I GH T E R R O R
U V SU SP E C T E D
IN CO M PL E T E NOT E S
M G S U S P EC T E D
D O U BL E N OT E S
H E IGH T E R R O R
.