ERROR MESSAGES
A variety of messages can be displayed on the Safescan 2885-S. These messages can occur during
counting or during start up. The error message screen shows the main problem, the solution and the error
message number.
ERROR MESSAGES LIST
Error message displayed
Mainloop broken
Jam
Jam Back Panel
Jam in Stacker
The Stacker is full
Back panel is open
Hopper sensor blocked
Stacker sensor blocked
ERROR MESSAGE
SOLUTION
ERROR MESSAGE NUMBER
Solution displayed
Restart the machine (E-1)
Remove all banknotes (E-4)
Remove all banknotes (E-5)
Remove all banknotes (E-7)
Remove all banknotes (E-8)
Close the back panel (E-9)
Clean the device (E-10)
Clean the machine (E-11)
www.safescan.com
ENGLISH
13