Status Led Indicators - Dell E30S002 Manual

Item Components - Indicator,
Button, or Connector
3 Status LED indicator panel
4 Information tag
5 USB port 2.0
6 USB port 3.0
7 Optical drive bay
8 Drive slot
9 Physical drives
10 Rack ear
Related link

Status LED indicators

Technical specifications
Status LED indicators
NOTE: The indicators display solid amber if any error occurs.
Figure 6. Status LED indicators
14 Installation and Service Manual
Dell EMC PowerEdge T440 overview
Icon Description
system ID button. You can also use the system ID button to reset iDRAC and
to access BIOS using the step through mode.
Indicate the status of the system. For more information, see the Status LED
N/A
indicators section.
The Information Tag is a slide-out label panel that contains system information
N/A
such as Service Tag, NIC, MAC address, and so on. If you have opted for
secure default access to iDRAC, the Information tag also contains the iDRAC
secure default password.
The USB ports are 4-pin, 2.0-compliant. These ports enable you to connect
USB devices to the system.
The USB port is USB 3.0 compliant.
Enable you to install drives that are supported on your system. For more
N/A
information about drives, see the Technical specifications section.
N/A Enables you to install TBUs for 8x and 16x backplane configurations, or drive
blank in the empty drive slot to maintain proper system cooling.
N/A 3.5 inch drives and 2.5 inch drives/SSDs.
N/A Enables you to convert the tower system to a rack system.