Sas Cables - Supermicro SC216BE1C-R741JBOD User Manual

SC216 JBOD Chassis Manual

SAS Cables

This drawing shows connectors for SAS cabling. For primary and secondary, the top
two connectors are marked In, and the bottom two connectors are marked In/Out.
Connect two mini-SAS HD cables (SFF-8644) from the head server node host bus
adapter (HBA) card to the top two Primary receptacles marked In. If using the E2C
model (SC216BE2C-R741JBOD) for redundancy, connect two more mini-SAS HD
cables to the top two Secondary receptables also marked In. Cables are described
in Appendix B.
To cascade out, connect cables from the two receptacles marked In/Out to the next
JBOD storage enclosure. (see Figure 4-4 and 4-5)
Labeled "In"
on Chassis
Labeled "In/Out"
on Chassis
Secondary
(E2C only)
{
{
Figure 4-3. SAS and IPMI Cables
(E2C model shown)
4-4
Primary
}
Labeled "In"
on Chassis
}
Labeled "In/Out"
on Chassis
IPMI