Table of Contents
Advertisement
SC216 JBOD Chassis Manaual
B-2 Safety Guidelines
ESD Safety
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent
damage to your system, it is important to handle it very carefully. The following
measures are generally sufficient to protect your equipment from ESD.
•
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing a component from the antistatic
bag.
•
Handle the backplane and daughter cards by their edges only; do not touch its
components, peripheral chips, memory modules or gold contacts.
•
When handling chips or modules, avoid touching their pins.
•
Put the card and peripherals back into their antistatic bags when not in use.
General Safety Guidelines
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
•
Always disconnect power cables before installing or removing any components
from the computer, including the backplane.
•
Disconnect the power cable before installing or removing any cables from the
backplane.
•
Make sure that the backplane is securely and properly installed on the
motherboard to prevent damage to the system due to power shortage.
B-3 Version Information
The BPN-SAS3-216EL backplane has been designed to utilize the most up-to-date
technology available, providing your system with reliable, high-quality performance.
This manual reflects BPN-SAS3-216EL revision 1.00 and daughter card revision
1.01, the most current releases available at the time of publication. Always refer to
the Supermicro Web site at www.supermicro.com for the latest updates, compatible
parts and supported configurations.
B-2
Advertisement
Table of Contents
