Table of Contents
Advertisement
SC216 JBOD Chassis Manual
3-4
Drive Carrier LEDs
The chassis includes externally accessible SAS/SATA drives. Each drive carrier
displays two status LEDs on the front of the carrier.
Activity LED
Status LED
3-5
Power Supply LEDs
On the rear of the power supply module, an LED displays the status.
•
Solid Green: When illuminated, indicates that the power supply is on.
•
Solid Amber: When illuminated, indicates the power supply is plugged in and
turned off, or the system is off but in an abnormal state.
•
Blinking Amber: When blinking, this system power supply temperature has
reached 63C. The system will automatically power-down when the power supply
temperature reaches 70C and restart when the power supply temperature goes
below 60C.
LED Color
Blinking Pattern
Blue
Blinking
Blue
Solid On
Off
Off
Red
Solid On
Red
Blinking at 1 Hz
Red
Blinking with two
blinks and one stop
at 1 Hz
Red
On for five
seconds, then off
Red
Blinking at 4 Hz
Behavior for Device
I/O activity
Idle SAS/NVMe drive installed
Idle SATA drive
Failure of drive with RSTe
support
Rebuild drive with RSTe support
Hot spare for drive with RSTe
support
Power on for drive with RSTe
support
Identify drive with RSTe support
3-4
Advertisement
Table of Contents
