Ipmi; Sas Cables - Supermicro CSE-826BE1C-R609JBOD User Manual

SC826 JBOD Chassis Manual

SAS Cables

This drawing shows connectors for SAS cabling. For primary and secondary, the top
two connectors are marked In, and the bottom two connectors are marked In/Out.
Connect two mini-SAS HD cables (SFF-8644) from the head server node host bus
adapter (HBA) card to the top two Primary receptacles marked In. If using the E2C
model (SC826BE2C-R741JBOD) for redundancy, connect two more mini-SAS HD
cables to the top two Secondary receptables also marked In. Cables are described
in Appendix B.
To cascade out, connect cables from the two receptacles marked In/Out to the next
JBOD storage enclosure. (see Figure 4-4 and 4-5)
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
{
Labeled "In"
on Chassis
{
Labeled "In/Out"
on Chassis
Figure 4-3. SAS and IPMI Cables
(E2C model shown)
Secondary
(E2C only) Primary
4-4
}
Labeled "In"
on Chassis
}
Labeled "In/Out"
on Chassis

IPMI