Installing The System Into A Rack; Identifying The Sections Of The Rack Rails - Supermicro SC216BE1C-R741JBOD User Manual

SC216 JBOD Chassis Manual
5-4

Installing the System into a Rack

This section provides information on installing the server into a rack unit with the
rack rails provided. There are a variety of rack units on the market, so the assembly
procedure may differ slightly. Refer to the installation instructions that came with
your rack. Note: This rail will fit a rack between 26.5" and 36.4" deep.

Identifying the Sections of the Rack Rails

The chassis package includes two rail assemblies. Each assembly consists of three
sections: An inner rail that secures directly to the chassis, an outer rail that secures
to the rack, and a middle rail which extends from the outer rail. These assemblies
are specifically designed for the left and right side of the chassis.
Rail Assembly
(Shown with Rails
Retracted)
Outer Rail
Middle Rail
Locking Tab
Inner Rail
This Side Faces
Outward
Figure 5-1. Identifying the Outer Rail, Middle Rail and Inner Rail
(Left Rail Assembly Shown)
5-4