Table of Contents
Advertisement
Tool specifications
Model
Stock number
Collet size
Head angle
Horsepower
Free speed
Air consumption under load
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Sound power
1
Sound pressure
Speed setting
Grip
Hose included
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
JAT-411, Right Angle Micro Die Grinder
505411
1/8 in.
90 deg.
0.1
70,000 RPM
5.5 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
2.0 m/s
84.0 dB(A)
72 dB(A)
variable
Pencil style shaft
5-ft. with strain relief sleeve
5.90 in. (150 mm)
Steel
0.50 lb. (0.23 kg)
0.82 lb. (0.37 kg)
JET
5
Advertisement
Table of Contents
